Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

1000g/Set 3:1 AB Glue Hard PVC Epoxy Resin DIY Model Making High Quality Crystal Epoxy Ultra Clear Transparent Paint Mold Maker Jewelry Making AB胶 AB膠 水晶滴胶 水晶滴膠
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Free Trade Zone
Anggaran Penghantaran
May 14, 2024 - May 28, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 51.74
Gambaran Kedai
Dream Zhengyuan
9 hours ago
Produk 48112
Pengikut 13
Penilaian 4.5
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Care  >  Paints & Primers
Brand
: NoBrand
Model
: Not Specified
SKU
: VFFB442T
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Free Trade Zone
Deskripsi Produk
Note: We don't have any label for this product.
DO NOT Pour more than 1cm each time to avoid crack!
Big bottle is A (Resin), small bottle is B (Hardener).

This is hard type epoxy resin. Suitable for jewelry, river table, tabletop coating & more.

Specification:
Weight: 1000g (A=750g + B=250g)
Type: Hard (Like PVC)
Weight Ratio: 3:1 (Resin:Hardener)
Volume Ratio (NOT recommended): 2.25:1 (Resin:Hardener)
Color: Crystal Clear (Transparent, can add color)
Cure Time: 20 hours for 1cm thickness at 25°C
Note: Please leave it 48 hours to achieve fully hardened.

How to use:
1. Clean your mold and product.
2. Mixing Epoxy Resin (A : B in Weight Ratio 3 : 1 )
- Epoxy requires a minimum mass of material for the chemical reaction to occur, ensuring that the material cures properly. We suggest to mix minimum 9 grams of resins (Part A) with 3 grams of hardener (Part B).
- Pour 9 grams of Resins (Part A) to 3 grams of Hardener (Part B) into an empty plastic cup (with total reading of 12 grams).
- Make sure to mix the 2 part epoxy according to the weight ratio 3 : 1 (Part A : B)
- Stir the mixture slowly using stick or mini spoon. This will minimize the possibility of air bubbles forming in the mixture.
- Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface.
Note: For volume ratio, A : B = 2.25 : 1
Example: 22.5ml A mix with 10ml B

NOTE: SUGGEST TO ADD IN SLIGHTLY MORE HARDENER (5% EXTRA) IF USE VOLUMETRIC MEASUREMENTS.

3. Pour epoxy resin into mold:
- Remove any air bubbles which may have formed during the application. Simply place the toothpick on the bubble and draw it towards the surface.
- Once applied, please allow minimum 16 hours for the mixture to be cured.
- Be sure to check on it periodically to make sure no air bubbles have formed in your design.

Please Note:
1. Due to the light and screen setting difference, the items color may be slightly different from the pictures.
2. Please allow slight dimension difference due to different manual measurement.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.