Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Liqui Moly Oil Sludge Flush (300 mL)
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

   Penghantaran Percuma
Penghantaran percuma East Malaysia untuk pesanan melebihi RM 50.00
Penghantaran percuma West Malaysia untuk pesanan melebihi RM 50.00

Penghantaran Dari
Free Trade Zone
Anggaran Penghantaran
May 26, 2024 - Jun 09, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 91
Gambaran Kedai
Munich
1 hours ago
Produk 43934
Pengikut 54
Penilaian 4.5
Sertai Within a Year
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Auto Oils & Fluids  >  Flushes
Brand
: Liqui Moly
Model
: Not Specified
SKU
: B8684J22
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Free Trade Zone
Deskripsi Produk
Description
Special highly effective combination of oil-soluble detergentsand thermally stable dispersants for rapid and easy removal of black sludge and other combustion products from the engine and crankcase. The combustion chamber of a gasoline engine contains fuel and air and, after ignition and combustion, completely or partially burnt residues. Most of the combustion products escape through the exhaust system but a small proportion pass into the crankcase as blow-by gas and thus into the motor oil. Partially burnt fuel has poor oil solubility and contributes to the formation of sludge and lacquers on the metal surfaces. In the presence of oxygen, nitrogen and heat, the lubricating oil forms insoluble oxidation products which also contribute to the formation of sludge and deposits. With diesel engines, sulfur is also carried into the combustion chamber where it is converted to SO2 and SO3 during combustion and forms sulfurous and sulfuric acids together with the water which is produced from the combustion of the fuel/air mixture. These products, which initially reside in the piston rings area with the soot and low-molecular oxidized fuel residues (even there having a detrimental effect on the engine), are carried downwards with the blow-by gases or motor oil into the crankcase where they form deposits and lacquers or cause rust and wear.

Properties
-> reduces deposits
-> removes black sludge
-> cleans oil ducts, holes and screens
-> simple to use
-> prevents expensive repairs
-> economical
-> prevents lubrication deficiency
-> prevents the agglomeration of combustion products

Areas of application
Used especially for dealing with sludge in all areas of gasoline and diesel engines.

Application
One 300 ml can is sufficient for engines with oil capacities of up to 5 liters. After adding the product drive as usual for about 200 km, but avoid full-throttle operation. Then change the motor oil and oil filter. Repeat the cleaning process in cases of extreme contamination. Clean the oil screen in the oil sump if necessary. Can be used before each oil change.

Comment
Not suitable for use on motorbikes with wet clutches.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.