Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

👶Olove 3D Three-dimensional Baby Hand And Foot Film Souvenir Baby Hand And Foot Clone Powder Model Powder
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
Jun 24, 2024 - Jul 01, 2024

Warna

Color

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 33.15
Gambaran Kedai
Kitty Good Goods
8 hours ago
Produk 21959
Pengikut 16
Penilaian 4.2
Sertai 7 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Kids & Baby  >  Toys & Others  >  Arts & Craft
Brand
: NoBrand
Model
: Not Specified
SKU
: 665677006704
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
INSTRUCTIONS:
1. Mix the molding powder with3 to3.2 times the amount of powder (300 to320 mL). Stir quickly until mixture is as smooth as possible. The mixture will turn a purple/pink color. Remember not to add too much water to the mixture.
2. After 1 minute, place babys hand or foot into this purple molding mixture at once. Please make sure the hand or foot is completely submerged, and doesnt break the surface of the mixture or touch the edge of cup.
3. Try to keep your babys hand or foot as still as possible while the molding mixture is setting.
4. Hold your babys foot in the mold for 240 more seconds to ensure the mold is fully set, then you can very carefully and smoothly remove their hand or foot from the mold.
5. To ensure a smooth release from the mold, wiggle slightly back and forth so that air can enter the opening of the mold.
6. Once the hand or foot has been removed, Open bag of plaster powder 50g, and mix with 1/3 to 1/2 of the amount of water (80 to90 mL). Stir as quickly until the mixture is as smooth as possible. Do not add too much water to the stone powder. The higher the concentration the stronger the casting will be.
7. Slowly pour the stone powder mixture into the opening of the mold. Gently jiggle the mold while pouring to ensure the liquid enters all the tiny areas and to avoid air becoming trapped inside creating air bubbles.
8. After 1 hours the stone mixture should be set. VERY gently remove the mold away from the casting. You can very carefully use a to help open the mold or by hand. Ensure open it very slow to ensure that you do not break the casting.
9. Once the casting is removed you may see a little powder on the surface. It can be washed by water, and air dry over 24 hours.
10. Paint Coat: After 24 hours you can paint your beautiful completed casting any color you wish.


Paint and enjoy!

The package includes:
100g x molding powder
100g x plaster
1 x powder (gold lacquer/silver lacquer lacquer/pearl lacquer)
1 x brush

Note: The frame is not included. This is generally only enough for a baby double or a foot.
Important: Do not add too much water to the powder mixture or they will not be set correctly and your casting will not succeed.

hello, guys, thank you for visiting my store.

Dear buyer,Welcome to our store.

Thank you for your attention,

Thank you for your support!Welcome to buy from us!
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.