Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

3D Hand Foot Print Mold DIY Plaster Casting Kit Handprint Footprint Model Powder For Baby
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
Jun 28, 2024 - Jul 05, 2024

Warna

Color

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 32.96
Gambaran Kedai
Kitty Good Goods
17 minutes ago
Produk 21959
Pengikut 17
Penilaian 4.2
Sertai 7 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Kids & Baby  >  Toys & Others  >  Arts & Craft
Brand
: NoBrand
Model
: Not Specified
SKU
: 006208792440
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
INSTRUCTIONS:
1. Mix the molding powder with3 to3.2 times the amount of powder (300 to320 mL). Stir quickly until mixture is as smooth as possible. The mixture will turn a purple/pink color. Remember not to add too much water to the mixture.
2. After 1 minute, place babys hand or foot into this purple molding mixture at once. Please make sure the hand or foot is completely submerged, and doesnt break the surface of the mixture or touch the edge of cup.
3. Try to keep your babys hand or foot as still as possible while the molding mixture is setting.
4. Hold your babys foot in the mold for 240 more seconds to ensure the mold is fully set, then you can very carefully and smoothly remove their hand or foot from the mold.
5. To ensure a smooth release from the mold, wiggle slightly back and forth so that air can enter the opening of the mold.
6. Once the hand or foot has been removed, Open bag of plaster powder 50g, and mix with 1/3 to 1/2 of the amount of water (80 to90 mL). Stir as quickly until the mixture is as smooth as possible. Do not add too much water to the stone powder. The higher the concentration the stronger the casting will be.
7. Slowly pour the stone powder mixture into the opening of the mold. Gently jiggle the mold while pouring to ensure the liquid enters all the tiny areas and to avoid air becoming trapped inside creating air bubbles.
8. After 1 hours the stone mixture should be set. VERY gently remove the mold away from the casting. You can very carefully use a to help open the mold or by hand. Ensure open it very slow to ensure that you do not break the casting.
9. Once the casting is removed you may see a little powder on the surface. It can be washed by water, and air dry over 24 hours.
10. Paint Coat: After 24 hours you can paint your beautiful completed casting any color you wish.

The package includes:
100g x molding powder
100g x plaster
1 x powder gold lacquer
1 x brush

Note: The frame is not included. This is generally only enough for a baby double or a foot.

Important: Do not add too much water to the powder mixture or they will not be set correctly and your casting will not succeed.
Have a nice day!

Welcome to visit.Hope you have a nice day!

we will be ready to reply you ASAP.

If you need more this item ,you can contact us.we will give you our best price. Leave your message!
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.