Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

500g 1:1 Fast Dry 0.5KG Epoxy Resin AB Glue Hard PVC Resin High Quality Crystal Ultra Clear Transparent Paint Maker
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Mainland China
Anggaran Penghantaran
Oct 15, 2024 - Nov 05, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 68.89
Gambaran Kedai
Xiaohu International
8 hours ago
Produk 21790
Pengikut 35
Penilaian 4.5
Sertai 11 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Health & Beauty  >  Makeup  >  Makeup Accessories  >  Eyelid Tape & Glue
Brand
: NoBrand
Model
: Not Specified
SKU
: 0F00ZPVR
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Mainland China
Deskripsi Produk
Note: We don't have any instruction manual for this product, please refer to our product page for instruction.

Why this product is more expensive than 3:1 Epoxy Resin?
1, This product is more easy to mix. Use volume ratio 1:1. (can direct use measurement cup)
2, Smaller bottle, suitable for beginner
3, Faster cure time (8 hours to harden, around 2-3 times faster than 3:1 epoxy)

This is hard type epoxy resin. Suitable for jewelry, river table, tabletop coating & more.


Specification:
Weight (include bottle ): ~535g (A=285g + B=250g)
Volume: A is around 5% more than B. (It doesn't matter if volume not same, still will harden if volume very similar)
Type: Hard (Like PVC)
Volume Ratio: 1:1 (Resin:Hardener) - Please use measurement cup or direct mix 2 bottles.
Color: Crystal Clear (Transparent, can add color)
Cure Time: 8 hours for 1cm (MAX) thickness at 25°C
100% Ready Stock. Ship from Malaysia (KL).

INSTRUCTIONS
1. Clean your mold and product.

2. Mixing Epoxy Resin (A : B in Volume Ratio 1 : 1 )
- Epoxy requires a minimum mass of material for the chemical reaction to occur, ensuring that the material cures properly. We suggest to mix minimum 10 ml of resins (Part A) with 10 ml of hardener (Part B).
- Pour 10 ml of Resins (Part A) to 10 ml of Hardener (Part B) into an empty plastic cup (with total reading of 20 ml).
- Make sure to mix the 2 part epoxy according to the volume ratio 1 : 1 (Part A : B)
- Stir the mixture slowly using stick or mini spoon. This will minimize the possibility of air bubbles forming in the mixture.
- Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface.

3. Pour epoxy resin into mold:
- Remove any air bubbles which may have formed during the application. Simply place the toothpick on the bubble and draw it towards the surface.
- Once applied, please allow minimum 8 hours for the mixture to be cured.
- Be sure to check on it periodically to make sure no air bubbles have formed in your design.

Visit www.EpoxyMalaysia.com for more info.

Ready Stock & Ship from Selangor.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.