Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

BSL Super 688 900ml Adhesive Spray Insulation Foam and Glue for Sponge, Soundproof, and Acoustic Foam
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Mainland China
Anggaran Penghantaran
Oct 14, 2024 - Nov 04, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 44.85
Gambaran Kedai
Yaya Good Goods
44 minutes ago
Produk 23153
Pengikut 45
Penilaian 4.6
Sertai 11 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Health & Beauty  >  Makeup  >  Makeup Accessories  >  Eyelid Tape & Glue
Brand
: NoBrand
Model
: Not Specified
SKU
: 4XZ66822
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Mainland China
Deskripsi Produk
BSL Super 688 900ml Adhesive Spray Insulation Foam and Glue for Sponge, Soundproof, and Acoustic Foam

Manufactures aerosol adhesives for sofas, mattresses and other furniture. It has the characteristics of strong viscosity, high viscosity, low odor, and good heat and cold resistance. At the same time, this product does not contain triphenyl and chlorine solvents. Compared with traditional glue spraying, it is flexible in operation, convenient and economical, and effectively reduces costs.

Instructions:
1. Before use, the surface of the adherend must be kept clean, dry, free of oil, dust, water, etc., and please shake it up and down vigorously;

2. Place the nozzle at about 20 cm from the adherend (such as sponge) and at about 45 degrees from the surface of the adherend; press down the nozzle to move at the surface of the adherend at a uniform speed to ensure that the amount of glue is uniform and there is no glue accumulation or lack of glue , Unevenness, etc., spray glue on both sides at the same time, and leave it in the air for 1 to 3 minutes. In the weather with low temperature and high humidity, the drying time should be extended appropriately;

3. After use, please turn the can upside down, press the nozzle to spray a little gas, remove the residual glue in the nozzle, and prevent the glue from clogging the nozzle when you use it next time;

*** After the spraying is completed, after a proper drying time (the specific drying time depends on the actual temperature, the fingers are dry and the sticky is strong), then pressure can be applied, and the material can be accurately recommended at one time. The best use temperature is 20~35℃.

CAUTION

- Please keep it out of reach of children;
- The place of use should be well ventilated;
- This product is pressurized and packaged. It is explosive when exposed to high temperature. Do not store in an environment with a temperature above 45°C;
- Avoid close to heat sources, fire sources and long-term direct sunlight;
- Please spray out the glue before discarding;
- If the glue contacts the skin or eyes, please wash it with plenty of water. In serious cases, please consult a doctor.
- DO NOT SHIP TO EAST MALAYSIA
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.