Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

UHU CONTACT LIQUID SUPER STRONG
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Selangor
Anggaran Penghantaran
Apr 27, 2024 - May 04, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 33.67
Gambaran Kedai
Yaya Good Goods
1 hours ago
Produk 23173
Pengikut 22
Penilaian 4.8
Sertai 5 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Health & Beauty  >  Makeup  >  Makeup Accessories  >  Eyelid Tape & Glue
Brand
: UHU
Model
: Not Specified
SKU
: 6VV6PVPV
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Selangor
Deskripsi Produk
UHU CONTACT LIQUID
Blister 30 g 33 ml
Super strong, liquid, universal contact adhesive.

Properties :
1) Bonds immediately
2) Super-strong
3) Suitable for materials under stress
4) Universal
5) Liquid
6) Moisture and frost resistant
7) Simple to use
8) Resistant to temperatures between -40°C and +70°C
9) Suitable for: Ideally suited for surface bonding or laminating of many materials that require
immediate bonding, loading or processing. Bonds wood, board, veneer, plastic and metal panel
boards (HPL, Formica®, for example), (foam) rubber, leather, cork, canvas, linoleum and
polyether foam (sound insulation), among other things, to itself as well as to many other
surfaces. Also for repairing shoes, bags, toys and carpets, or for doing (hobby) handicraft work.

Handling :
*Before use:
# Working conditions
Use adhesive and parts to be bonded at room temperature only. The relative humidity must be
below 65%. This is to avoid formation of bubbles in the final product. Once attached, adjustment
is no longer possible. Always test on an (inconspicuous) part of the surface first.
# Surface requirements
Surfaces must be dry, clean, dust- and grease-free and a good fit. Clean and degrease the
surfaces to be bonded for optimal results.
# Preliminary surface treatment
For optimal result, degrease first.
# Tools
Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or
rubber mallet to join the materials firmly.

* During use:
# Directions for use
Parts must be clean, dry and free of grease. Coat both substrates completely. Allow to dry for a
minimum of 10-40 minutes. In case of porous materials, apply a second coat and let dry. Then
join parts and roll or tap firmly (with a rubber mallet).
# Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature
(definitely do not use below +10°C). The final bonding strength depends on the pressure
applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive
joint between porous materials be exposed to long-lasting contact with water, the adhesive may
detach from the wet surface.

* After use:
# Stains/residue
Remove fresh adhesive residue immediately with Acetone. Dried adhesive residue can only be
removed mechanically or with a paint remover (test first).
# Storage conditions
Store properly closed in a cool and frost-free place. Shelf life is a minimum 24 months.
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.