Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

SpeedyBee F405 Wing APP Fixed Wing Flight Controller for RC Plane Wing Glider FPV
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Perak
Anggaran Penghantaran
May 21, 2024 - May 28, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

100 Unit lagi
Jumlah
RM 278.2
Gambaran Kedai
MAOLI Good Goods
30 minutes ago
Produk 41630
Pengikut 74
Penilaian 4.7
Sertai 6 Months Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Electronic Devices  >  Camera  >  Drones & Aerial Imaging
Brand
: NoBrand
Model
: Not Specified
SKU
: PPD08Z60
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Perak
Deskripsi Produk
The Speedy Bee F405 WING APP Fixed Wing Flight Controller is the perfect choice for FPV fixed-wing pilots. This controller is equipped with STM32 F405 MCU for faster and smoother performance, an ICM-42688-P IMU, 6 UARTS, and Bluetooth connectivity. With additional features like an OSD, barometer, and onboard RGB battery indicator, this controller is sure to provide an optimal flying experience.

SpeedyBee F405 WING APP FC Stack:
Supports Wireless configuration
Supports RGB LED strip
Supports Battery level indicator
Compatible FC Firmware: INAV / Ardupilot
Power Input: 2-6S LiPo
Dimension: 52（L） x 32（W） x 19（H） mm
Weight: 35g（with USB extender）

SpeedyBee F405 WING FC board:
MCU: STM32F405,168MHz,1MB Flash
IMU(Gyro&Accelerometer): ICM-42688-P
Barometer: SPL006-001
OSD Chip: AT7456E
Blackbox: MicroSD Card Slot
6x UART’s
1x I2C for magnetometer, digital airspeed sensor
4x ADC for VBAT, Current, RSSI, Analog AirSpeed Sensor
12x PWM 12x (11 PWM output + 1 LED pad)
ExpressLRS (ELRS) and Crossfire (CRSF) Receivers Supported (UART1)
Built in inverter for SBUS input (UART2-RX pad)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red) 1x RGB
RSSI Supported (RS pad)
Supported FC Firmware
INAV FC target:SpeedyBeeF405WING (default)
ArduPilot FC target: SpeedyBeeF405WING

SpeedyBee F405 WING PDB board:
Input voltage range 7~36V (2~6S LiPo)
Battery Voltage Sensor Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode Yes
FC BEC output Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
VTX BEC output Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
Servo BEC output Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.

SpeedyBee F405 WING Wireless board:
Wireless Configuration (long press BOOT button for 6 seconds to switch modes) BLE mode, connect to Speedybee APP
Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) 4x WS2812 LED strip connectors, adjustable colors and flashing modes
Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads
On-board battery level indicator 4x RGB indicator LED for battery level display by number of lights
Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.