Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Jim Dunlop MXR M80+ Bass DI Plus Effect Pedal
No Rating Yet
0 Dijual

/ Per Produk

Penghantaran

Penghantaran Dari
Mainland China
Anggaran Penghantaran
Sep 29, 2024 - Oct 20, 2024

Warna

Color Family

Sila pilih variasi produk terlebih dahulu

Kuantiti

1 Unit lagi
Jumlah
RM 1099.9
Gambaran Kedai
Arctic wolf
28 minutes ago
Produk 78277
Pengikut 5
Penilaian 5
Sertai Within a Month
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Automotive & Motorbike  >  Exterior Accessories  >  Running Boards & Steps
Brand
: NoBrand
Model
: Not Specified
SKU
: 109744590
Dimension (Length x Width x Height)
: 10.00 x 15.00 x 20.00
Weight(kg)
: 0.6
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Mainland China
Deskripsi Produk

MXR® BASS DI+

M80

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

  • Both Clean and Distortion channels.
  • Run direct to the PA or straight to the mixing board.
  • Smart “noise gate” and optimized EQ.

THE LONG STORY

Finally, all the essentials in one tough little box. You need a serious D.I. for playing live and laying down killer tracks. You've got to have a preamp and finely tuned EQ to add punch to your tones. And you definitely can't do without some rich, custom distortion. This one-of-a-kind pedal gives you the whole deal in a bomb-proof enclosure that will survive even the most out of control gigs-and players. Built with the highest quality components, the M-80 can give you eve everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual. Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will. The adjustable noise gate pours on the sustain and cuts out hum and hiss. With XLR and parallel 1/4" outputs and a phantom power switch, you'll never have a problem delivering your choice new tones.

CONTROLS

  1. PHANTOM/ GROUND enables Phantom Power or Ground Lift
  2. LEFT FOOTSWITCH toggles Effects on/bypass (red LED=on)
  3. RIGHT FOOTSWITCH toggles Distortion channel in/out (red LED at top of unit indicates Distortion channel active)
  4. BASS-MID-TREBLE EQ KNOBS are active when effect is on
  5. COLOR SWITCH activates a preset EQ optimized for bass (switch depressed down)
  6. CLEAN VOLUME and COLOR controls are active only in Clean Channel mode (Effect Footswitch on and Distortion off)
  7. DISTORTION CHANNEL MODE (Effect and Distortion Footswitches on) provides controls for Gain to set distortion level, Blend to mix distorted/ clean signal, and Volume
  8. GATE SWITCH and TRIGGER KNOB work interactively to provide an adjustable noise gate. With Gate active (switch depressed down), the Trigger Knob sets the noise floor threshold, or sensitivity, to cut hum and hiss from the distortion signa

DIRECTIONS

  • Set all controls to their middle position and set switches to their off position (all LEDs unlit).
  • Run a cable from your bass to the Input jack of the Bass D.I.+ and run another cable from the Bass D.I.+ Output jack to your amplifier.
  • To use the D.I. (Direct Input) function, run a balanced line (microphone cable) from the Bass D.I.+ Direct Output to your mixing board or PA input.
  • Turn on the Bass D.I.+ Clean channel effect by depressing the Effect footswitch (Effect LED lit).
  • Adjust the Clean Volume to the desired level, such as to match or boost your bypassed, effect off signal.
  • Push in the Color switch to engage a clean preset EQ designed to color your bass tone with added punch, definition and clarity.
  • Depress the Distortion footswitch to engage the Distortion channel (Distortion LED lit).
  • Use the Gain control to set the amount of distortion, the Blend control to set a mix between the clean preset EQ and distortion effects, and Volume control to POWER The MXR M80 Bass D.I. + requires a single 9 volt alkaline battery, Phantom Power from mixing board (through microphone cable) or a Dunlop ECB003 AC adapter (ECB003E in Europe) or a Dunlop DCB10 DC Brick power supply. set the distortion channel’s output level.
  • Push in the Gate switch to activate the adjustable noise gate with Smart Gate™ technology. Set the Trigger knob threshold low (counter-clockwise) to kill hum and hiss from the distortion signal while sustaining desired signals without premature, audible cutoff. To create a dynamic distortion effect, set the Trigger to higher (clockwise) Trigger threshold settings so that the gate only opens during loud passages. The Gate’s yellow status LED turns off when the gate is opened and on when the gate is closed.
  • Use the Bass, Mid and Treble controls to shape Clean and Distortion effect tones.
  • The Parallel Output can be used to connect to a tuner or any other parallel processing device.
  • The Bass D.I.+ can be phantom powered through its Direct Output jack from a phantom power capable mixing console. Push the Phantom/Ground switch to its down position to enable phantom power or up position to ground lift the Direct Output connection and remove noisy ground loops

SPECIFICATIONS

  • Input Impedance 2.2 MΩ
  • Output Impedance
  • Unbalanced 150 Ω
  • Balanced 300 Ω
  • Bypass Freq. Response
  • +0/-0.5 dB, 20 Hz to 20 kHz
  • Tone Controls
  • Bass ±18 dB, 60 Hz
  • Mid ±10 dB, 850 Hz
  • Treble ±12 dB, 4 kHz
  • Noise Floor*
  • Bypass -102 dBV
  • Clean Effect -98 dBV
  • Distortion Effect, Gate Off -94 dBV
  • Distortion Effect, Gate On -98 dBV
  • Volume Control Range 40 dB
  • Gate Trigger Range 28 dB
  • Sensitivity -66 dBV at 1 kHz
  • Bypass Buffered
  • Current Draw 9 mA
  • Power Supply 9 volts DC

Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.