Metal, Wood and Electricity Detector UNI-T UT387B
* metal detection
* live wire detection
* wood detection
SPECIFICATION: UT387B
Ferrous metals 80mm
Non-ferrous metals 80mm
Live Conductors 50mm
Wood 20mm
FUNCTIONS:
Buzzer Indication
Flashing LED light indication
Auto Power Off
Low Battery Indication
Silent Mode
User Calibration
GENERAL CHARACTERISTICS:
Power: 9V battery (6F22)
Weight: 274g
Size: 220x83x30mm
UT387C
Certi?cates=CE, RoHS, FCC
Detect principle=Electro-magnetic induction
Detects=Wooden beam, metal object, electric wire
Metal-scan depth=76mm
Stud-scan depth (wood)=28.5mm
Thick-scan depth (wood)=38mm
AC electric wire depth=51mm
Detect accuracy=±15mm @28.5mm depth drywall
Calibration error alarm √
Notifications=LED/buzzer
GENERAL CHARACTERISTICS
Power=9V battery (6F22)
Product net weight=247g; UT387D: 112g
Product size=170mm x 70.5mm x 38.9mm
UT387D (Chinese)
Certi?cates=CE, RoHS, FCC
Detect principle=Electro-magnetic induction
Detects=Wooden beam, metal object, electric wire
Metal-scan depth=100mm @iron pipe; 80mm @brass pipe
Stud-scan depth (wood)=38mm
AC electric wire depth=50mm
Detect accuracy=±15mm @28.5mm depth drywall
Notifications=Voice
GENERAL CHARACTERISTICS
Power=3.7V 300mAh Li-ion
Product net weight=112g
Product size=135 x 60mm x 25mm
UT387C Wall Scanner
Used to detect wood, metal (water pipes, steel bars, copper pipes), and live wires under gypsum board.
Notifications:LED/buzzer
When the detector detects different substances in different modes. the LED indicator light will give out a corresponding color prompt and a buzzer prompt.
HD backlit large screen
Easily display data in dark environments
Multiple detection modes/Precise positioning
Multi-material application (measurable metal, wire, wood)
Precise positioning
The sensor is located near the marking hole, and the center target is positioned to ensure accurate detection.
Up and down parallel fluff pad design
Add Velcro design up and down to increase the flatness of the instrument
Steps
1. Hold the holding part of UT387C with your hands, place the instrument up and down. with the bottom flat against the wall. 2. Select the detection mode. When the mode switch is moved to the far left, it is to select the first blocking Stud Scan mode, as shown in Figure 1. When it is moved to the second gear, it is to select the Thick Scan mode as shown in Figure 2. 3. Calibrate, press and hold the power button without letting go. At this time, when the instrument enters the automatic calibration process, all icons will be displayed on the LCD screen (including: "StudScan"/ThickScan"+ "Battery Power Symbol" + Metal + Target Indication Bar) until the instrument verification is completed. When the instrument is successfully verified, the green LED flashes once and the buzzer briefly sounds once to remind the user that the verification has been successful. At this time, the instrument can be moved to detect wood or other objects.
Notice:Battery don't include