Specifications:
100% full load burn-in test
Universal AC input / full range
It's good quality & high performance
Input: AC110-265V 50/60Hz
Output: DC 12v
Protections: overload/ over voltage/ short circuit
Cooling by free air convection
(Not suggest for use in bathroom)
Connection:
L, N: AC power input
GND: DC power output "-"
V: DC power output "+"
+V / ADJ: Adjust the output voltage
Safety Compliance: CCC/ FCC / CE
Working Temperature: 0~40℃
Storage Temperature: -20~60℃
Ambient Humidity: 0~95% Non-Condensation
Compatible with 3528, 2835 ,3014, 5050, 5630 ,5730 Led strip lights
Dimension :
(Manual measurement,Maybe it has 3-8mm measurement error.)
Type (Output)
Size (LxWxH)
Package include:
1 x Power supply
Note:
1.This is a DC24V Power Supply Unit for professional use on LED lightning, Security Surveillance System, CCTV Security Camera, IP Camera, and etc.
2.Safety design with shortage protection, overload protection and auto voltage switching.
3.Regulated voltage & current output. This is a perfect choice to use as a LED Driver for all type of LED lighting 3.without flickering light & ensue the life span of your LED.
4.Full range of current output is possible for LED lighting with dimmable function.
5.Voltage output fine adjustment is available for different power condition.
About Calculate Method:
If Your LED Strip 60LEDs/m, and each LED 0.2W, then calculate max led Strip Length: 0.2W/LED × 60LEDs/m=12W/m, 24W(this listing)÷12W/m=2m,
So, Support the LED Strip(60LEDs/m, 0.2W/LED) Length (Max)=2m
Special Note:
This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable,on/off switch, or screws.
Professional Installation of qualified electrician is highly recommended.
产品规格：
100％满载老化测试
通用交流输入/全范围
它质量好，性能高
输入：AC110-265V 50 / 60Hz
输出：DC 24V
保护：过载/过压/短路
通过自由空气对流冷却
（不建议在浴室使用）
连接：
L，N：交流电源输入
GND：直流电源输出“ - ”
V：直流电源输出“+”
+ V / ADJ：调节输出电压
安全合规性：CCC / FCC / CE
工作温度：0~40℃
储存温度：-20~60℃
环境湿度：0~95％不结露
兼容3528,2835,3014,5050,5630,5730带LED灯
尺寸 ：
（手动测量，也许它有3-8mm的测量误差。）
类型（输出）
尺寸（长x宽x高）
套餐包括：
1个电源
注意：
1.这是专业用于LED闪电，安防监控系统，CCTV安全摄像机，IP摄像机等的DC24V电源装置。
2.具有短路保护，过载保护和自动电压切换的安全设计。
3.调节电压和电流输出。 这是用作所有类型LED照明的LED驱动器的完美选择3.没有闪烁的光线并且可以延长LED的使用寿命。
4.具有可调光功能的LED照明可实现全范围的电流输出。
5.电压输出微调适用于不同的电源条件。
关于计算方法：
如果你的LED灯带60LEDs / m，每个LED 0.2W，那么计算最大灯带长度：0.2W / LED×60LEDs / m = 12W / m，24W（此列表）÷12W / m = 2m，
因此，支持LED灯条（60LEDs / m，0.2W / LED）长度（最大值）= 2m
特别说明：
此电源单元“DOES NOT”附带安装说明，接线电缆，开/关开关或螺钉。
专业安装合格的电工强烈建议。
