Malaysia Leading Online Shopping Marketplace

  • Jual Dengan Kami
  • Ikut Kami Di
  • Notifikasi
    Notifikasi Baharu
  • Help
  • Daftar
  • Log Masuk

Sila Log Masuk untuk melihat produk.

Replacement Thermostat Two Cabinet Refrigerator (Thermostat VT9)
No Rating Yet
0 Dijual
/ Per Produk

Penghantaran

Penghantaran Dari
Johor
Anggaran Penghantaran
Apr 19, 2024 - Apr 26, 2024

Warna

Sila pilih variasi produk terlebih dahulu

Kuantiti

3 Unit lagi
Jumlah
RM 23.5
Gambaran Kedai
Norman Lim
14 hours ago
Produk 274
Pengikut 3
Penilaian 4.6
Sertai 3 Years Ago
Kadar Pembatalan 0%
Spesifikasi Produk
Category
: Home Appliances  >  Large Appliances  >  Refrigerators
Brand
: Not Specified
Model
: Not Specified
SKU
: VT9
Dimension (Length x Width x Height)
: 10.00 x 10.00 x 10.00
Weight(kg)
: 0.2
Manufacturing Country
: Not Specified
Warranty Type
: No Warranty
Warranty Value
: -
Warranty Description
: -
Hantar Dari
: Johor
Deskripsi Produk

MOUNTING

- The thermostat can be mounted either directly by using the centre mounting bush and nut or by using the adaptor bracket provided.

- This brackel can be titted in any one of four positions, By locating the smail lug on the thermostal trame in one of the notches located on the periphery ol the centre portion ol the adaptor bracket, it can be used for clearance hole mounting, or for tapped hole mounting.

- Using the captive nuts provided.

- If tapped holes are needed.

- Fit the captive nuts to the bracket and slide them to the required cantres.

- Any excess lenghth of bracket can be broken off along one of the fwo lateral grooves provided.

- Lock the bracket to the control in the position required by means of the centre nut.

- Install the control and secure by means of the mounting screws.


NOTA

- When installing the capillary tube.

- Care must be taken to avoid kinks, twists or sharpo bends in the tube

- No altempt should be made to shorten the tube under any circumstances.

- The detum marker should be titted in a suitable place on the liner push - on - conneclors are provided lor conversion where screw terminals were previously used.


Push dial knob onto diat shaft.

Use either numbered face of disc.

Or shint as reference for calibration aligning 0 at lowest setting.

If using skin.

Push disc into knob with plain face uppermost.

With Vp4.

Use push - button in place of dise.

Penilaian produk
- / 5.0
Copy Link
Copy Link
Copy
Copied to Clipboard!
  • 0 Troli Membeli-belah
  • Wishlist
  • Pusat Kupon
  • Informasi
  • Chat
  • Log Masuk / Daftar
  • What's In The Box
  • Kongsi
  • Kembali
  • Kembali Ke Atas
    • ©2024 PG Mall Sdn. Bhd. 200801035285 (836625-K). All Rights Reserved.