Premium OtterGel Wiping Wood Stain Pastel Wood Color Collection 0.31L A03 YELLOW BIRCH

Malaysia Leading Online Shopping Marketplace

No Rating Yet

0 Sold

RM 22.00 / Per Item

colors

Quantity

4 Items Left

Total :
RM 22.00

Store Overview

KIM HOO
20 days ago

Products 523 Joined 6 Months Ago

Followers 1 Cancellation Rate 0%

Rating 0

Product Specification

Product Description

Premium OtterGel Wiping Wood Stain Pastel Wood Color Collection 0.31L

The easiest wood stain to be used.

Very easy to apply, skilled labor not required.

Dry in two hours and good color retention.

No sealer, mixing or special tools required.

No lap marks, drips, streaking and peeling problem.

Very easy to revive or refurnish old furniture.

-----------------------------------

Solvent Based

----------------------------------

Key Features:

Easy to apply, rub, and clean with lint-free cloth, brush or sponge.

Color stays permanently, non-fading, no peels or blisters.

Economical use provides 3 times more coverage compared to shellac or varnish

-----------------------------------

OtterGel is unlike any liquid stain, available in 45 colors. It is very easy to apply, no skilled labor is required. It is ideal for vertical wood surfaces. As a colored foundation compatible with all types of lacquers, P.U., N.C. and Acrylic, etc.

-------------------------------

Recommended Use Ideal for wood, fiberglass, metal and composite doors. Use on all interior wood surfaces, furniture, hardboard surfaces, molding, veneer, and wall paneling.

-------------------------------

Result

It does not raise the grain of the wood.

Leave no wiping or lap marks.

No stirring - color very consistency from top to bottom.

--------------------------------

Coverage

One application will cover 280 - 320 sq.ft.: Per liter or (26sqm to 29sqm) depending on the porosity of the surface..

Available in 1/3 quart

Shelf Life: Minimum 2 years

----------------------------

Application

Just apply, rub, wipe with a clean lint-free cloth (T-Shirt)

The surface should be free of finish wax or contaminates..

Use 280 grit sandpapers to sand a smooth surface..

Rub OtterGel with lint cloth or sponge spreading as far as possible to fill the wood pores evenly.

Only one coat is required.

Wipe off excess gel with another clean lint-free cloth in the direction of the grain until smooth and even, color achieved and no more sanding required.

Wait at least 1 hour to dry.

To dilute gel, mineral spirit or turpentine liquid can be added.

(For gloss appearance: apply 2 coats of Furniture Crystal Lacquer sealer and 2 coats Top Coat (Gloss or Matte Finishes) or Otter H20 based Polyurethane finish)